class MfeaNode

The MFEA node class. More...


Annotated List	Files	Globals	Hierarchy	Index	Top

Public Methods

MfeaNode (FeaNode& fea_node, int family, xorp_module_id module_id, EventLoop& eventloop)
virtual ~MfeaNode ()
FeaNode& fea_node ()
bool is_dummy () const
int start ()
int stop ()
int final_start ()
int final_stop ()
void enable ()
void disable ()
bool have_multicast_routing4 () const
bool have_multicast_routing6 () const
int add_vif (const Vif& vif, string& error_msg)
int delete_vif (const string& vif_name, string& error_msg)
int add_config_vif (const Vif& vif, string& error_msg)
int set_config_vif_flags (const string& vif_name, bool is_pim_register, bool is_p2p, bool is_loopback, bool is_multicast, bool is_broadcast, bool is_up, uint32_t mtu, string& error_msg)
int set_config_all_vifs_done (string& error_msg)
int enable_vif (const string& vif_name, string& error_msg)
int disable_vif (const string& vif_name, string& error_msg)
int start_vif (const string& vif_name, string& error_msg)
int stop_vif (const string& vif_name, string& error_msg)
int start_all_vifs ()
int stop_all_vifs ()
int enable_all_vifs ()
int disable_all_vifs ()
void delete_all_vifs ()
void vif_shutdown_completed (const string& vif_name)
int register_protocol (const string& module_instance_name, const string& if_name, const string& vif_name, uint8_t ip_protocol, string& error_msg)
int unregister_protocol (const string& module_instance_name, const string& if_name, const string& vif_name, string& error_msg)
int proto_recv (const string& , const string& , const IPvX& , const IPvX& , uint8_t , int32_t , int32_t , bool , bool , const vector<uint8_t>& , string& )
int proto_send (const string& , const string& , const IPvX& , const IPvX& , uint8_t , int32_t , int32_t , bool , bool , const uint8_t* , size_t , string& )
int signal_message_recv (const string& src_module_instance_name, int message_type, uint32_t vif_index, const IPvX& src, const IPvX& dst, const uint8_t *rcvbuf, size_t rcvlen)
int signal_dataflow_message_recv (const IPvX& source, const IPvX& group, const TimeVal& threshold_interval, const TimeVal& measured_interval, uint32_t threshold_packets, uint32_t threshold_bytes, uint32_t measured_packets, uint32_t measured_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall)
virtual int dataflow_signal_send (const string& dst_module_instance_name, const IPvX& source_addr, const IPvX& group_addr, uint32_t threshold_interval_sec, uint32_t threshold_interval_usec, uint32_t measured_interval_sec, uint32_t measured_interval_usec, uint32_t threshold_packets, uint32_t threshold_bytes, uint32_t measured_packets, uint32_t measured_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall)
int add_mfc (const string& module_instance_name, const IPvX& source, const IPvX& group, uint32_t iif_vif_index, const Mifset& oiflist, const Mifset& oiflist_disable_wrongvif, uint32_t max_vifs_oiflist, const IPvX& rp_addr)
int delete_mfc (const string& module_instance_name, const IPvX& source, const IPvX& group)
int add_dataflow_monitor (const string& module_instance_name, const IPvX& source, const IPvX& group, const TimeVal& threshold_interval, uint32_t threshold_packets, uint32_t threshold_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall, string& error_msg)
int delete_dataflow_monitor (const string& module_instance_name, const IPvX& source, const IPvX& group, const TimeVal& threshold_interval, uint32_t threshold_packets, uint32_t threshold_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall, string& error_msg)
int delete_all_dataflow_monitor (const string& module_instance_name, const IPvX& source, const IPvX& group, string& error_msg)
int add_multicast_vif (uint32_t vif_index)
int delete_multicast_vif (uint32_t vif_index)
int get_sg_count (const IPvX& source, const IPvX& group, SgCount& sg_count)
int get_vif_count (uint32_t vif_index, VifCount& vif_count)
MfeaMrouter& mfea_mrouter ()
MfeaDft& mfea_dft ()
bool is_log_trace () const
void set_log_trace (bool is_enabled)

Protected Methods

IfConfigUpdateReplicator& mfea_iftree_update_replicator ()

Detailed Description

There should be one node per MFEA instance. There should be one instance per address family.

MfeaNode (FeaNode& fea_node, int family, xorp_module_id module_id, EventLoop& eventloop)

MfeaNode

Constructor for a given address family, module ID, and event loop.

Parameters:

fea_node	the corresponding FeaNode (FeaNode).
family	the address family (AF_INET or AF_INET6 for IPv4 and IPv6 respectively).
module_id	the module ID (xorp_module_id). Should be equal to XORP_MODULE_MFEA.
eventloop	the event loop to use.

~MfeaNode ()

~MfeaNode

[virtual]

Destructor

FeaNode& fea_node ()

fea_node

Get the FEA node instance.

Returns: reference to the FEA node instance.

bool is_dummy ()

is_dummy

[const]

Test if running in dummy mode.

Returns: true if running in dummy mode, otherwise false.

int start ()

start

Start the node operation.

After the startup operations are completed, MfeaNode::final_start() is called internally to complete the job.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int stop ()

stop

Stop the node operation.

After the shutdown operations are completed, MfeaNode::final_stop() is called internally to complete the job.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int final_start ()

final_start

Completely start the node operation.

This method should be called internally after MfeaNode::start() to complete the job.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int final_stop ()

final_stop

Completely stop the node operation.

This method should be called internally after MfeaNode::stop() to complete the job.

Returns: XORP_OK on success, otherwise XORP_ERROR.

void enable ()

enable

Enable node operation.

If an unit is not enabled, it cannot be start, or pending-start.

void disable ()

disable

Disable node operation.

If an unit is disabled, it cannot be start or pending-start. If the unit was runnning, it will be stop first.

bool have_multicast_routing4 ()

have_multicast_routing4

[const]

Test if the underlying system supports IPv4 multicast routing.

Returns: true if the underlying system supports IPv4 multicast routing, otherwise false.

bool have_multicast_routing6 ()

have_multicast_routing6

[const]

Test if the underlying system supports IPv6 multicast routing.

Returns: true if the underlying system supports IPv6 multicast routing, otherwise false.

int add_vif (const Vif& vif, string& error_msg)

add_vif

Install a new MFEA vif.

Parameters:

vif	vif information about the new MfeaVif to install.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

Reimplemented from ProtoNode.

int delete_vif (const string& vif_name, string& error_msg)

delete_vif

Delete an existing MFEA vif.

Parameters:

vif_name	the name of the vif to delete.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

Reimplemented from ProtoNode.

int add_config_vif (const Vif& vif, string& error_msg)

add_config_vif

Add a configured vif.

Parameters:

vif	the vif with the information to add.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

Reimplemented from ProtoNode.

int set_config_vif_flags (const string& vif_name, bool is_pim_register, bool is_p2p, bool is_loopback, bool is_multicast, bool is_broadcast, bool is_up, uint32_t mtu, string& error_msg)

set_config_vif_flags

Set the vif flags of a configured vif.

Parameters:

vif_name	the name of the vif.
is_pim_register	true if the vif is a PIM Register interface.
is_p2p	true if the vif is point-to-point interface.
is_loopback	true if the vif is a loopback interface.
is_multicast	true if the vif is multicast capable.
is_broadcast	true if the vif is broadcast capable.
is_up	true if the underlying vif is UP.
mtu	the MTU of the vif.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

Reimplemented from ProtoNode.

int set_config_all_vifs_done (string& error_msg)

set_config_all_vifs_done

Complete the set of vif configuration changes.

Parameters:

error_msg

the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int enable_vif (const string& vif_name, string& error_msg)

enable_vif

Enable an existing MFEA vif.

Parameters:

vif_name	the name of the vif to enable.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int disable_vif (const string& vif_name, string& error_msg)

disable_vif

Disable an existing MFEA vif.

Parameters:

vif_name	the name of the vif to disable.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int start_vif (const string& vif_name, string& error_msg)

start_vif

Start an existing MFEA vif.

Parameters:

vif_name	the name of the vif to start.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int stop_vif (const string& vif_name, string& error_msg)

stop_vif

Stop an existing MFEA vif.

Parameters:

vif_name	the name of the vif to start.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int start_all_vifs ()

start_all_vifs

Start MFEA on all enabled interfaces.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int stop_all_vifs ()

stop_all_vifs

Stop MFEA on all interfaces it was running on.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int enable_all_vifs ()

enable_all_vifs

Enable MFEA on all interfaces.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int disable_all_vifs ()

disable_all_vifs

Disable MFEA on all interfaces.

All running interfaces are stopped first.

Returns: XORP_OK on success, otherwise XORP_ERROR.

void delete_all_vifs ()

delete_all_vifs

Delete all MFEA vifs.

void vif_shutdown_completed (const string& vif_name)

vif_shutdown_completed

A method called when a vif has completed its shutdown.

Parameters:

vif_name

the name of the vif that has completed its shutdown.

int register_protocol (const string& module_instance_name, const string& if_name, const string& vif_name, uint8_t ip_protocol, string& error_msg)

register_protocol

There could be only one registered protocol per interface/vif.

Parameters:

module_instance_name	the module instance name of the protocol to register.
if_name	the name of the interface to register for the particular protocol.
vif_name	the name of the vif to register for the particular protocol.
ip_protocol	the IP protocol number. It must be between 1 and 255.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int unregister_protocol (const string& module_instance_name, const string& if_name, const string& vif_name, string& error_msg)

unregister_protocol

Unregister a protocol on an interface in the Multicast FEA.

There could be only one registered protocol per interface/vif.

Parameters:

module_instance_name	the module instance name of the protocol to unregister.
if_name	the name of the interface to unregister for the particular protocol.
vif_name	the name of the vif to unregister for the particular protocol.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int proto_recv (const string& , const string& , const IPvX& , const IPvX& , uint8_t , int32_t , int32_t , bool , bool , const vector<uint8_t>& , string& )

proto_recv

UNUSED

Reimplemented from ProtoNode.

int proto_send (const string& , const string& , const IPvX& , const IPvX& , uint8_t , int32_t , int32_t , bool , bool , const uint8_t* , size_t , string& )

proto_send

UNUSED

Reimplemented from ProtoNode.

int signal_message_recv (const string& src_module_instance_name, int message_type, uint32_t vif_index, const IPvX& src, const IPvX& dst, const uint8_t *rcvbuf, size_t rcvlen)

signal_message_recv

Process NOCACHE, WRONGVIF/WRONGMIF, WHOLEPKT signals from the kernel.

The signal is sent to all user-level protocols that expect it.


#define IGMPMSG_NOCACHE         1
#define IGMPMSG_WRONGVIF        2
#define IGMPMSG_WHOLEPKT        3

#define MRT6MSG_NOCACHE         1
#define MRT6MSG_WRONGMIF        2
#define MRT6MSG_WHOLEPKT        3

Parameters:

src_module_instance_name	unused.
message_type	the message type of the kernel signal (for IPv4 and IPv6 respectively):
vif_index	the vif index of the related interface (message-specific).
src	the source address in the message.
dst	the destination address in the message.
rcvbuf	the data buffer with the additional information in the message.
rcvlen	the data length in rcvbuf.

Returns: XORP_OK on success, otherwise XORP_ERROR.

Reimplemented from ProtoNode.

int signal_dataflow_message_recv (const IPvX& source, const IPvX& group, const TimeVal& threshold_interval, const TimeVal& measured_interval, uint32_t threshold_packets, uint32_t threshold_bytes, uint32_t measured_packets, uint32_t measured_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall)

signal_dataflow_message_recv

Process a dataflow upcall from the kernel or from the MFEA internal mechanism.

The MFEA internal bandwidth-estimation mechanism is based on periodic reading of the kernel multicast forwarding statistics. The signal is sent to all user-level protocols that expect it.

Note: either is_threshold_in_packets or is_threshold_in_bytes (or both) must be true. Note: either is_geq_upcall or is_leq_upcall (but not both) must be true.

Parameters:

source	the source address.
group	the group address.
threshold_interval	the dataflow threshold interval.
measured_interval	the dataflow measured interval.
threshold_packets	the threshold (in number of packets) to compare against.
threshold_bytes	the threshold (in number of bytes) to compare against.
measured_packets	the number of packets measured within the measured_interval.
measured_bytes	the number of bytes measured within the measured_interval.
is_threshold_in_packets	if true, threshold_packets is valid.
is_threshold_in_bytes	if true, threshold_bytes is valid.
is_geq_upcall	if true, the operation for comparison is ">=".
is_leq_upcall	if true, the operation for comparison is "<=".

Returns: XORP_OK on success, otherwise XORP_ERROR.

int dataflow_signal_send (const string& dst_module_instance_name, const IPvX& source_addr, const IPvX& group_addr, uint32_t threshold_interval_sec, uint32_t threshold_interval_usec, uint32_t measured_interval_sec, uint32_t measured_interval_usec, uint32_t threshold_packets, uint32_t threshold_bytes, uint32_t measured_packets, uint32_t measured_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall)

dataflow_signal_send

[pure virtual]

Send a signal that a dataflow-related pre-condition is true.

This is a pure virtual function, and it must be implemented by the communication-wrapper class that inherits this base class.

Note: either is_threshold_in_packets or is_threshold_in_bytes (or both) must be true. Note: either is_geq_upcall or is_leq_upcall (but not both) must be true.

Parameters:

dst_module_instance_name	the module instance name of the module-recepient of the message.
source_addr	the source address of the dataflow.
group_addr	the group address of the dataflow.
threshold_interval_sec	the number of seconds in the interval requested for measurement.
threshold_interval_usec	the number of microseconds in the interval requested for measurement.
measured_interval_sec	the number of seconds in the last measured interval that has triggered the signal.
measured_interval_usec	the number of microseconds in the last measured interval that has triggered the signal.
threshold_packets	the threshold value to trigger a signal (in number of packets).
threshold_bytes	the threshold value to trigger a signal (in bytes).
measured_packets	the number of packets measured within the measured_interval.
measured_bytes	the number of bytes measured within the measured_interval.
is_threshold_in_packets	if true, threshold_packets is valid.
is_threshold_in_bytes	if true, threshold_bytes is valid.
is_geq_upcall	if true, the operation for comparison is ">=".
is_leq_upcall	if true, the operation for comparison is "<=".

Returns: XORP_OK on success, otherwise XORP_ERROR.

int add_mfc (const string& module_instance_name, const IPvX& source, const IPvX& group, uint32_t iif_vif_index, const Mifset& oiflist, const Mifset& oiflist_disable_wrongvif, uint32_t max_vifs_oiflist, const IPvX& rp_addr)

add_mfc

Add Multicast Forwarding Cache (MFC) to the kernel.

Parameters:

module_instance_name	the module instance name of the protocol that adds the MFC.
source	the source address.
group	the group address.
iif_vif_index	the vif index of the incoming interface.
oiflist	the bitset with the outgoing interfaces.
oiflist_disable_wrongvif	the bitset with the outgoing interfaces to disable the WRONGVIF signal.
max_vifs_oiflist	the number of vifs covered by oiflist or oiflist_disable_wrongvif.
rp_addr	the RP address.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int delete_mfc (const string& module_instance_name, const IPvX& source, const IPvX& group)

delete_mfc

Delete Multicast Forwarding Cache (MFC) from the kernel.

Note: all corresponding dataflow entries are also removed.

Parameters:

module_instance_name	the module instance name of the protocol that deletes the MFC.
source	the source address.
group	the group address.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int add_dataflow_monitor (const string& module_instance_name, const IPvX& source, const IPvX& group, const TimeVal& threshold_interval, uint32_t threshold_packets, uint32_t threshold_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall, string& error_msg)

add_dataflow_monitor

Add a dataflow monitor entry.

Note: either is_threshold_in_packets or is_threshold_in_bytes (or both) must be true. Note: either is_geq_upcall or is_leq_upcall (but not both) must be true.

Parameters:

module_instance_name	the module instance name of the protocol that adds the dataflow monitor entry.
source	the source address.
group	the group address.
threshold_interval	the dataflow threshold interval.
threshold_packets	the threshold (in number of packets) to compare against.
threshold_bytes	the threshold (in number of bytes) to compare against.
is_threshold_in_packets	if true, threshold_packets is valid.
is_threshold_in_bytes	if true, threshold_bytes is valid.
is_geq_upcall	if true, the operation for comparison is ">=".
is_leq_upcall	if true, the operation for comparison is "<=".
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int delete_dataflow_monitor (const string& module_instance_name, const IPvX& source, const IPvX& group, const TimeVal& threshold_interval, uint32_t threshold_packets, uint32_t threshold_bytes, bool is_threshold_in_packets, bool is_threshold_in_bytes, bool is_geq_upcall, bool is_leq_upcall, string& error_msg)

delete_dataflow_monitor

Delete a dataflow monitor entry.

Note: either is_threshold_in_packets or is_threshold_in_bytes (or both) must be true. Note: either is_geq_upcall or is_leq_upcall (but not both) must be true.

Parameters:

module_instance_name	the module instance name of the protocol that deletes the dataflow monitor entry.
source	the source address.
group	the group address.
threshold_interval	the dataflow threshold interval.
threshold_packets	the threshold (in number of packets) to compare against.
threshold_bytes	the threshold (in number of bytes) to compare against.
is_threshold_in_packets	if true, threshold_packets is valid.
is_threshold_in_bytes	if true, threshold_bytes is valid.
is_geq_upcall	if true, the operation for comparison is ">=".
is_leq_upcall	if true, the operation for comparison is "<=".
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int delete_all_dataflow_monitor (const string& module_instance_name, const IPvX& source, const IPvX& group, string& error_msg)

delete_all_dataflow_monitor

Delete all dataflow monitor entries for a given source and group address.

Parameters:

module_instance_name	the module instance name of the protocol that deletes the dataflow monitor entry.
source	the source address.
group	the group address.
error_msg	the error message (if error).

Returns: XORP_OK on success, otherwise XORP_ERROR.

int add_multicast_vif (uint32_t vif_index)

add_multicast_vif

Add a multicast vif to the kernel.

Parameters:

vif_index

the vif index of the interface to add.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int delete_multicast_vif (uint32_t vif_index)

delete_multicast_vif

Delete a multicast vif from the kernel.

Parameters:

vif_index

the vif index of the interface to delete.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int get_sg_count (const IPvX& source, const IPvX& group, SgCount& sg_count)

get_sg_count

Get MFC multicast forwarding statistics from the kernel.

Get the number of packets and bytes forwarded by a particular Multicast Forwarding Cache (MFC) entry in the kernel, and the number of packets arrived on wrong interface for that entry.

Parameters:

source	the MFC source address.
group	the MFC group address.
sg_count	a reference to a SgCount class to place the result: the number of packets and bytes forwarded by the particular MFC entry, and the number of packets arrived on a wrong interface.

Returns: XORP_OK on success, otherwise XORP_ERROR.

int get_vif_count (uint32_t vif_index, VifCount& vif_count)

get_vif_count

Get interface multicast forwarding statistics from the kernel.

Get the number of packets and bytes received on, or forwarded on a particular multicast interface.

Parameters:

vif_index	the vif index of the virtual multicast interface whose statistics we need.
vif_count	a reference to a VifCount class to store the result.

Returns: XORP_OK on success, otherwise XORP_ERROR.

MfeaMrouter& mfea_mrouter ()

mfea_mrouter

Get a reference to the mrouter (MfeaMrouter).

Returns: a reference to the mrouter (MfeaMrouter).

MfeaDft& mfea_dft ()

mfea_dft

Get a reference to the dataflow table (MfeaDft).

Returns: a reference to the dataflow table (MfeaDft).

bool is_log_trace ()

is_log_trace

[const]

Test if trace log is enabled.

This method is used to test whether to output trace log debug messges.

Returns: true if trace log is enabled, otherwise false.

void set_log_trace (bool is_enabled)

set_log_trace

Enable/disable trace log.

This method is used to enable/disable trace log debug messages output.

Parameters:

is_enabled

if true, trace log is enabled, otherwise is disabled.

IfConfigUpdateReplicator& mfea_iftree_update_replicator ()

mfea_iftree_update_replicator

[protected]

Generated by: bms on anglepoise.lon.incunabulum.net on Wed Jul 23 10:05:50 2008, using kdoc 2.0a54+XORP.