Re: [bluetooth] Re: Clock Recovery in BT

[Jamil Khatib <khatib@ieee.org>]

Hi,
Try to look at the access code correlator I designed (you can find it in the bluetooth project pages).
the correlator keeps comparing hte inputs till both the input and the expected value are matched within
certain threshold. Till now I do not know how to select this threshold.
regarding the preamble  ( and since the correlator does not look for the exact pattern) I think we can
ignore them

Note: the correlator is too slow and it needs lot of modifications to get faster

Any comments
Jamil Khatib

> Hello Mr. Khatib
>
> Yes that symbol recovery is what I am talking about.
> There is a preamble of 1010 or 0101 before 68-bit
> access code which helps in determining the symbol
> rate. In inquiry and other packets which have no
> header or payload, access code is only 68 bits,
> without any preamble. also due to settling time of
> radio, it is less likely that we can receive all the 4
> bits of preamble at receiver. In all these cases (that
> is no preamble and unknown number of preamble bits)
> how symbol recovery can be done? I will be thankful to
> you if you can guide me on this.
>
> regards
> Faisal
> --- Ling Su <lingsu@palmmicro.com> wrote:
> > I guess it would't be access code correlator, it
> > means the symbol recovery
> > before you feed the data into your logic. Bluetooth
> > need pretty fast
> > recovery, since it only has 4 sync symbol.
> >
> > -Ling
> >
> > ----- Original Message -----
> > From: "Jamil Khatib" <jamilkhatib75@yahoo.com>
> > To: <bluetooth@opencores.org>
> > Cc: <faisalmaalik@yahoo.com>
> > Sent: Wednesday, July 25, 2001 1:39 PM
> > Subject: Re: [bluetooth] Clock Recovery in BT
> >
> >
> > > Hi,
> > > sorry for the delay.
> > > do you mean the access code correlator?
> > >
> > > if not can you explain it to me because it seems
> > the I
> > > am missing something.
> > >
> > > regards,
> > > Jamil
> > >
> > > --- Faisal <faisalmaalik@yahoo.com> wrote:
> > > >
> > > > Hello
> > > >
> > > > can any one help me in designing of the clock
> > and
> > > > data recovery sub-block of bluetooth baseband
> > > > receiver. Any suggestions, ideas or relevant
> > > > information would be welcome.
> > > >
> > > > Faisal
> > > >
> > > >
> > > >
> > > > ---------------------------------
> > > > Do You Yahoo!?
> > > > Make international calls for as low as
> > $.04/minute
> > > > with Yahoo! Messenger
> > > > http://phonecard.yahoo.com/
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Make international calls for as low as $.04/minute
> > with Yahoo! Messenger
> > > http://phonecard.yahoo.com/
> > > --
> > > To unsubscribe from bluetooth mailing list please
> > visit
> > http://www.opencores.org/mailinglists.shtml
> > >
> >
> > --
> > To unsubscribe from bluetooth mailing list please
> > visit http://www.opencores.org/mailinglists.shtml
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
> --
> To unsubscribe from bluetooth mailing list please visit http://www.opencores.org/mailinglists.shtml

--
   Jamil Khatib
OpenCores Organization
http://www.opencores.org


--
To unsubscribe from bluetooth mailing list please visit http://www.opencores.org/mailinglists.shtml