<?XML Version="1.0">
<nidocument>
<nicomment>
LabVIEW error file
</nicomment>
<nierror code="0">
FieldPoint:  IAK operation was successful.
</nierror>
<nierror code="32768">
FieldPoint:  Task is terminated.
</nierror>
<nierror code="32769">
FieldPoint:  The task is pending.
</nierror>
<nierror code="32800">
FieldPoint:  General server error.
</nierror>
<nierror code="32801">
FieldPoint:  An invalid item was specified.
</nierror>
<nierror code="32802">
FieldPoint:  An invalid completion was specified.
</nierror>
<nierror code="32803">
FieldPoint:  An invalid task ID was specified.
</nierror>
<nierror code="32804">
FieldPoint:  An invalid IAHandle was specified.
</nierror>
<nierror code="32805">
FieldPoint:  An invalid status code was specified.
</nierror>
<nierror code="32806">
FieldPoint:  An unknown IAType was specified.
</nierror>
<nierror code="32807">
FieldPoint:  A task buffer overflow occurred.
</nierror>
<nierror code="32808">
FieldPoint:  The IAK server has not been initialized.
</nierror>
<nierror code="32809">
FieldPoint:  The IAK server has already been initialized.
</nierror>
<nierror code="32810">
FieldPoint:  The IAK server initialization has failed.
</nierror>
<nierror code="32811">
FieldPoint:  The IAK server is shutdown.
</nierror>
<nierror code="32812">
FieldPoint:  The specified tag name was not found.
</nierror>
<nierror code="32813">
FieldPoint:  The specified tag has already been defined.
</nierror>
<nierror code="32814">
FieldPoint:  The item is in use.
</nierror>
<nierror code="32815">
FieldPoint:  The completion is in use.
</nierror>
<nierror code="32816">
FieldPoint:  The task is still pending.
</nierror>
<nierror code="32817">
FieldPoint:  The specified attribute is unknown.
</nierror>
<nierror code="32818">
FieldPoint:  The attribute is not a property of the specified object.
</nierror>
<nierror code="32819">
FieldPoint:  The item definition string is not valid.
</nierror>
<nierror code="32820">
FieldPoint:  The item is read only.
</nierror>
<nierror code="32821">
FieldPoint:  The item is write only.
</nierror>
<nierror code="32822">
FieldPoint:  The type conversion is not supported for the specified item.
</nierror>
<nierror code="32823">
FieldPoint:  The I/O operation has failed.
</nierror>
<nierror code="32824">
FieldPoint:  The item specified is too large.
</nierror>
<nierror code="32825">
FieldPoint:  The type coversion failed.
</nierror>
<nierror code="32826">
FieldPoint:  The device has faulted.
</nierror>
<nierror code="32827">
FieldPoint:  The device is offline.
</nierror>
<nierror code="32828">
FieldPoint:  The timeout period has expired.
</nierror>
<nierror code="32829">
FieldPoint:  The network communication has failed.
</nierror>
<nierror code="32830">
FieldPoint:  Unable to bind to comm port.
</nierror>
<nierror code="32831">
FieldPoint:  The Common Configuration Database (CCDB) was not found.
</nierror>
<nierror code="32832">
FieldPoint:  The initialization of the CCDB failed.
</nierror>
<nierror code="32833">
FieldPoint:  The server has not been configured or could not be found.
</nierror>
<nierror code="32834">
FieldPoint:  There are no configured devices for the server.
</nierror>
<nierror code="32835">
FieldPoint:  Memory allocation has failed.
</nierror>
<nierror code="32836">
FieldPoint:  An unrecoverable operating system error has occurred.
</nierror>
<nierror code="32837">
FieldPoint:  The IAK operation is not implemented.
</nierror>
<nierror code="32838">
FieldPoint:  An unrecoverable IAK server internal error has occurred.
</nierror>
<nierror code="32839">
FieldPoint:  An unknown error condition has occurred.
</nierror>
<nierror code="32841">
FieldPoint:  Evaluation version of the server has timed out.
</nierror>
<nierror code="32896">
FieldPoint:  Power up clear expected.
</nierror>
<nierror code="32897">
FieldPoint:  Undefined or invalid command.
</nierror>
<nierror code="32898">
FieldPoint:  Checksum does not match sum of command characters.
</nierror>
<nierror code="32899">
FieldPoint:  Input buffer overrun.
</nierror>
<nierror code="32900">
FieldPoint:  Non-printable ASCII character received
</nierror>
<nierror code="32901">
FieldPoint:  Not enough characters received.
</nierror>
<nierror code="32902">
FieldPoint:  Communications link watchdog timeout error.
</nierror>
<nierror code="32903">
FieldPoint:  Specified limits invalid.
</nierror>
<nierror code="33024">
FieldPoint:  An illegal digit was received.
</nierror>
<nierror code="33025">
FieldPoint:  The addressed module does not support the command received.
</nierror>
<nierror code="33026">
FieldPoint:  A framing error was detected.
</nierror>
<nierror code="33027">
FieldPoint:  The addressed module does not exist.
</nierror>
<nierror code="33028">
FieldPoint:  Channel does not exist or does not support the operation.
</nierror>
<nierror code="33029">
FieldPoint:  Range does not exist or does not support the operation.
</nierror>
<nierror code="33030">
FieldPoint:  Attribute does not exist or does not support the operation.
</nierror>
<nierror code="33032">
FieldPoint:  The module has been hot-swapped since it was last addressed by a command.
</nierror>
<nierror code="33033">
FieldPoint:  Same module not addressed by the resend command.
</nierror>
<nierror code="33034">
FieldPoint:  No response available to resend.
</nierror>
<nierror code="33035">
FieldPoint:  Hardware error on instrument.
</nierror>
<nierror code="33036">
FieldPoint:  Unknown error from instrument.
</nierror>
<nierror code="33152">
FieldPoint:  Unknown error on FieldPoint server.
</nierror>
<nierror code="33153">
FieldPoint:  Value is outside of the current range.
</nierror>
<nierror code="33154">
FieldPoint:  An invalid termination character was received by the server.
</nierror>
<nierror code="33155">
FieldPoint:  An invalid checksum was received by the server.
</nierror>
<nierror code="33156">
FieldPoint:  Error accessing server information in registry.
</nierror>
<nierror code="33157">
FieldPoint:  Error accessing module information files.
</nierror>
<nierror code="33158">
FieldPoint:  The module addressed is a different type than the selected type.
</nierror>
<nierror code="33159">
FieldPoint:  Required module information is unavailable.
</nierror>
<nierror code="33160">
FieldPoint:  Error identifying module.
</nierror>
<nierror code="33161">
FieldPoint:  The write operation failed to change the value.
</nierror>
<nierror code="33162">
FieldPoint:  Unable to connect to the data item on the module.
</nierror>
<nierror code="33163">
FieldPoint:  The connection to the module has been broken.
</nierror>
<nierror code="33172">
FieldPoint:  Attempt to publish data of incorrect type for specified item.
</nierror>
<nierror code="33173">
FieldPoint:  Unable to reference cached value.
</nierror>
<nierror code="33174">
FieldPoint:  Warning: Attempt to create published data item that already exists.
</nierror>
<nierror code="33175">
FieldPoint:  The Block or Item name contains illegal characters.
</nierror>
<nierror code="33176">
FieldPoint:  Warning: Unable to delete point.
</nierror>
<nierror code="33177">
FieldPoint:  Attempt to delete point that does not exist.
</nierror>
<nierror code="33178">
FieldPoint:  Empty Block could not be removed.
</nierror>
<nierror code="33179">
FieldPoint:  An invalid action was attempted
</nierror>
<nierror code="33180">
FieldPoint:  The amount of data provided does not match the number of data items required or the number of channels to be addressed.
</nierror>
<nierror code="33436">
FieldPoint:  Bad channel status reported by module.
</nierror>
<nierror code="33437">
FieldPoint:  The specified module was sent a Power-Up Clear command.
</nierror>
<nierror code="33438">
FieldPoint:  Bad channel status reported for all contained channels -- Specific Error A.
</nierror>
<nierror code="33439">
FieldPoint:  Bad channel status reported for all contained channels -- Specific Error B.
</nierror>
<nierror code="33440">
FieldPoint:  Bad channel status reported for all contained channels -- The specified channel is unconfigured.
</nierror>
<nierror code="33441">
FieldPoint:  Bad channel status reported for all contained channels -- The specified channel does not exist.
</nierror>
<nierror code="33442">
FieldPoint:  An unknown warning was returned by the FieldPoint hardware.
</nierror>
<nierror code="33443">
FieldPoint:  Several contained channels reported a bad channel status.
</nierror>
<nierror code="33444">
FieldPoint:  Several contained channels reported a bad channel status -- Specific Error A.
</nierror>
<nierror code="33445">
FieldPoint:  Several contained channels reported a bad channel status -- Specific Error B.
</nierror>
<nierror code="33446">
FieldPoint:  Several contained channels are unconfigured.
</nierror>
<nierror code="33447">
FieldPoint:  Several contained channels do not exist.
</nierror>
<nierror code="33448">
FieldPoint:  Bad channel status reported by module for all contained channels.
</nierror>
<nierror code="33487">
FieldPoint:  Signal out of measurement range.
</nierror>
<nierror code="33488">
FieldPoint:  Open current loop detected.
</nierror>
<nierror code="33489">
FieldPoint:  Open thermocouple detected.
</nierror>
<nierror code="33490">
FieldPoint:  Open RTD detected
</nierror>
<nierror code="33491">
FieldPoint:  The count channel overflowed since last read.
</nierror>
<nierror code="33492">
FieldPoint:  The specified channel is sourcing the maximum current allowed.
</nierror>
<nierror code="33493">
FieldPoint:  The specified channel is in overcurrent protection mode.
</nierror>
<nierror code="33494">
FieldPoint:  The specified module does not exist; the base is empty.
</nierror>
<nierror code="33495">
FieldPoint:  The data returned from the module is bad.
</nierror>
<nierror code="33587">
FieldPoint:  All channels in item out of range.
</nierror>
<nierror code="33588">
FieldPoint:  All channels in item reported an open current loop.
</nierror>
<nierror code="33589">
FieldPoint:  All channels in item reported open thermocouple
</nierror>
<nierror code="33590">
FieldPoint:  All channels in item reported open RTDs
</nierror>
</nidocument>